Model selection guide for modular machine tools
Deep hole drilling machines have a complete range of specifications. In order to facilitate the selection of your deep hole drilling machines, please select your requirements from the list, including:
(1) part type -- mold, drum, hollow shaft, ring mold, tube plate, roll.
(2) minimum aperture: 1mm, 2mm, 4mm, 18mm, 60mm
Maximum aperture; 5mm 10mm 20mm 30mm 60mm 90mm 120mm
(3) maximum drilling depth; 100mm 500mm 1000mm 1200mm 1500mm 2000mm 2500mm
3m 4m 5m 6m 7m 8m 9m 9m 10m 11m 12m 13m
(4) the maximum length, width and height (weight or diameter) of the workpiece;
(5) driving mode: semi-automatic (manual positioning + automatic cutting tool), numerical control (the drilling efficiency and quality of both are the same, numerical control is much more convenient).
Imported: FANUC mitsubishi Siemens others
(6) peak production (1 to 16 bits can be selected for simultaneous drilling).
(7) the machine tool should have a single coordinate (only the feed movement of the drill); Two coordinates (the bit's feed motion is Z axis and the workpiece can be moved in X direction). X stroke three coordinates (the bit's feed movement is the Z axis, X, Y direction of the moving positioning hole coordinates). X stroke Y stroke five coordinates (bit feed movement is Z axis, X, Y direction to move the positioning hole coordinates) (U axis to adjust the vertical Angle of the drilling hole, V axis to adjust the horizontal Angle of the drilling hole). X travel and Y travel
(8) straightness requirements: no more than 0.05mm/100mm (high precision) or no more than 0.1mm/100mm(low precision) the bit and the workpiece rotate at the same time. Under normal circumstances, 0.01--0.05mm/100mm
Related products:
Special purpose machine tools of characteristics
Nc special machine tool of working principle
Other related products:
