Fully automatic water softener structure

Water softening equipment is to use the resin to soften the source water, the main purpose is to let the resin adsorption of calcium, magnesium ions in the water (the main component of scale formation), reduce the hardness of the source water, and can carry out intelligent resin regeneration, recycling.

Automatic water softener (water softener) structure

1, control valve: the use of domestic or imported automatic brand control valve, complete functions, stable performance.

2. Anti-corrosion tank body: the tank body is made of glass fiber reinforced plastic (carbon steel or stainless steel lined tank body can be selected). The tank body is anticorrosive, pressure-resistant and has a long service life.

3, uniform water distribution system: the use of jet water distribution, the effective exchange capacity of resin can be fully played, with salt control precision, no need for salt pump.

4, high-performance resin: domestic, imported high-quality cation exchange resin, low damage rate, uniform particle size, improve ion exchange rate.

Automatic water softener (water softener) features

1. High efficiency: the overall design of water softening device is reasonable, so that the effective working exchange capacity of resin can be brought into full play.

2, provincial work: high degree of automation, no need to set a person on guard.

3. Water saving: the water production rate of the softening water device is more than 98%.

4, power saving: siphon regeneration principle, no need for salt pump, power consumption is only equivalent to manual soft water equipment 1%.

5, small space: only need to provide resin tank and salt tank space, save the space occupied by the pipeline, salt pump.

6. Easy adjustment: users can adjust the regeneration cycle and regeneration time according to their actual needs.

7. Low operating cost: due to the high degree of automation, the water softener can adapt to the water volume changes, accurately measure the water yield and the amount of regenerant, avoiding the innocent waste of regenerant in the process of regeneration, and saving a large amount of labor cost at the same time.

Automatic water softener (water softener) working procedure

1. Water supply: the untreated water passes through the resin layer and produces soft water through exchange reaction.

2, back wash: water from the lower layer of resin into the resin, loose the resin, remove small debris.

3, salt absorption slow washing: the use of high concentration of salt water (Nacl) through the resin, the failure of the resin to re-reduce to sodium resin.

4, forward washing: according to the process of water supply, the water through the resin to wash off the excess salt solution and regenerate the exchange of calcium and magnesium ions.

5. Water injection: water is injected into the salt box to dissolve salt for the next regeneration.

Related products:

Water softener of flow debugging control method
Automatic water softener control system water treatment process flow

Other related products:

Vacuum Pump Vacuum Inlet Filters
Helium mass spectrometer leak detector