Summary of Internal and External Characteristics of Vacuum Pump
The inherent characteristics of vacuum pumps refer to the inherent characteristics of products, including product performance, parts quality, assembly quality, appearance quality, etc., referred to as quality. At this point, many pump manufacturers are also concerned about efforts to improve and improve. In fact, we can find that many products can not reach the effect of factory inspection after factory inspection meets the requirements of users, and problems such as overload, noise increase, unsatisfactory use or life reduction occur; and the operating point or operating characteristics of vacuum pumps in practice, we call them the external characteristics of vacuum pumps. Or system characteristics.
From the point of view of sales, selling products is to promote the inherent characteristics of pumps, while focusing on the external characteristics of vacuum pumps is that manufacturers are not only promoting products, but also promoting pumping stations (complete engineering projects). From the point of view of use, a good product must be suitable for the running environment rather than the product of factory inspection and discrimination.
Accelerated utilization of new materials and processes in vacuum pumps:
Over the past many years, the application of new materials and processes has been a major factor in promoting the development of vacuum pump technology. Pump materials from cast iron to special metal alloys, from rubber products, ceramics and other typical non-metallic materials to engineering plastics, have played a prominent role in solving the environment of corrosion resistance, wear resistance, high temperature resistance of pumps. At the same time, the application of the new technology makes the new material better applied to the parts of the pump and even the whole pump. For example, some foreign manufacturers have designed and introduced all pumps made of Engineering plastics. Compared with the pumps made of general metal materials, they are not inferior in strength and superior in corrosion resistance and wear resistance. For example, the use of new surface coating technology and surface treatment technology can also solve the problem of anti-corrosion and anti-wear of vacuum pumps. The further development of new materials and the application of new technology will be more extensive in the field of pumps.
The technicians of Zhonghuan Vacuum Pump Plant often spend a lot of thought in product design to improve one percent efficiency of a product, and if the pump operation deviates from the design efficiency, the actual operation efficiency will not only be reduced by one percent. Now, pump manufacturers also provide users with control equipment including frequency conversion and complete sets of equipment, in fact, has been involved in the pursuit of the external characteristics of the pump. On this basis, pay more attention to the centralized control system of the pump and improve the operation efficiency of the whole pump and pumping station, it is in the pursuit of the external characteristics of the pump to a higher level.
