High efficiency vacuum oil injector

Working principle:

It is designed according to the different boiling points of water and oil. It is composed of vacuum heating tank fine filter, condenser, primary filter, water tank, vacuum pump, exhaust pump and electric cabinet. Vacuum pump will vacuum the air in the vacuum tank to form a vacuum, the outside oil under the action of atmospheric pressure, through an inlet pipe into the primary filter, remove the larger particles, and then into the heating tank, after heating and other 40~75℃ of oil through the automatic oil drift valve, the valve is automatically control into the vacuum tank of the amount of oil in and out of balance. After being heated, the oil is separated into semi-mist by rotating rapidly through the jet wing. The water in the oil rapidly evaporates into steam and is continuously sucked into the condenser by the vacuum pump. Entering the condenser water vapor released back to the original after cooling water, in a vacuum heating oil tank, be drainage pump into the fine filter through particles in the filter paper or filter will filter out impurities, so as to complete the vacuum filters oil machine rapidly process to remove impurities in oil, water, gas, clean the oil from the oil discharge outside.

Related products:

transformer vacuum oil filling equipment of operation measures
vacuum oiling equipment of maintenance method

Other related products:

Turbo molecular pump station
Vacuum pumps for beverage factory